DM4050 24GX + 6XS
The DM4050 Ethernet Switches family is composed by two Gigabit Ethernet Switches with 10GE uplinks, based on Datacom’s modular operating system DmOS.
With a complete L2/L3 feature set, the DM4050 switches are the perfect choice for several applications of Gigabit Ethernet access and aggregation on Metro Ethernet and Enterprise networks.
The switches are 1U height and they are ready for standard 19″ rack installation.
Both models have two slots for redundant, hot swappable, full-range AC/DC power supply units, ensuring high availability services and operation.
Wire Speed Switch with full hardware-based L2 and L3 packet forwarding, filtering and QoS
IEEE 802.1Q VLAN functionality, supporting up to 4k VLANs, QinQ, Selective QinQ and VLAN Translate *
Link Aggregation and LACP support
Serves applications in ring topology through the EAPS protocol
Protection system against L2 loops and also for operation in redundant topologies through Rapid Spanning Tree protocol (RSTP)
L2 Protocol Tunneling – Slow Protocol Tunneling (L2CP) *
Static routing and dynamic routing through OSPF and BGP protocols
QoS with up to 8 queues per port and packet classification based on IEEE802.1p, DSCP, Source and destination ports
QoS Scheduling in Strict Priority (SP) or Weighted Fair Queuing (WFQ)
Rate Limit on input and output (ingress and egress)
Support for ACL filters with matches per port, MAC address, IP address, DSCP or TCP / UDP
CLI management via local serial interface or through Telnet / SSH
TACACS and RADIUS support for access and management policies administration
External alarm interfaces, containing one output and two inputs
Scalability L2 / L3: 16,000 MAC addresses, 1,000 L3 routes, 4,000 Hosts