Switch de Acesso 10GE

Categorias: , Tag:



Product Overview

The DM4370 Ethernet Switch is a compact, high performance access switch ready for the growing migration of access services towards 10 Gbps. The switch is based on Datacom’s modular network operating system DmOS, with support for a complete L2/L3 feature set including MPLS support, turning it into the perfect fit for high bandwidth and high value enterprise or mobile backhaul access applications. The switch contains 4 optical SFP+ based 10GE interfaces, 4 optical SFP-based 1GE interfaces and 4 additional 1GE electrical interfaces.

The DM4370 switch is 1U height and it can be installed both on desktops or standard 19″ rack, with a mechanical adapter holding up to two switches side by side. The product has an integrated  full-range AC/DC power supply module and an additional 12V DC input for optional power redundancy for high availability services and operation.


Wire Speed with full hardware-based L2, L3 and MPLS forwarding, filtering and QoS

IEEE802.1Q VLAN with Q-in-Q and VLAN Translate capabilities

Link Aggregation and LACP

Support for Ring applications through EAPS or ERPS protocols

STP/RSTP for loop protection

L2 Slow Protocol Tunneling (L2CP)

Up to 8 QoS queues per port

Static Routing and Dynamic Routing through OSPF and BGP protocols

Virtual IP redundancy through VRRP protocol

Operation as Label Edge Router or Label Switch Router through MPLS encapsulation

LDP for label distribution on MPLS network infrastructure

Ingress and Egress Rate Limit

Packet classification by IEEE802.1p, DSCP, Source/Destination Port

Packet Scheduling through SP and WFQ modes

ACL Matches by port, MAC address, IP, DSCP, TCP/UDP

CLI Management interface with Telnet/SSH

TACACS and RADIUS support for access and management policies administration



Não há avaliações ainda.

Seja o primeiro a avaliar “Switch de Acesso 10GE”

O seu endereço de e-mail não será publicado. Campos obrigatórios são marcados com *